LiteWide Node – GSM Lighting controller
LiteWide Node is wireless GSM control unit installed into the housing of each luminaire (or mounted to NEMA socket). Every lamp equipped with LiteWide Node is controlled individually via GSM through Sundrax’s innovative LiteWide technology. Unlike wireless radio control nodes, LiteWide Nodes communicate directly with QULON Server without any intermediate gateways.
Wireless Lighting Control
LiteWide Node provides dimming functionality via different interfaces (DALI, PWM/1-10 V) as well as individual load control (on/off).
Key Features
- Versions with open wires and NEMA plug
- Waterproof case IP65
- Individual lighting control without additional wires
- Embedded luminance sensor
- Embedded GSM antenna
- Embedded GPS/GLONASS receiver
- Embedded triac for load switching on/off
- Scheduled on/off and dimming
- Automatic node positioning on the map
- Motion sensor input
Specifications
| Connectors: |
Leads, NEMA |
| Sensors: |
Motion sensor input, Embedded luminance sensor |
| Control output interface: |
1-10V/PWM, DALI |
| Communication with controller: |
GSM 850/900/1800/1900 |
| Navigation: |
GPS/GLONASS |
| Transmit power ranges: |
Class 4 (+33dBm ± 2dB) for EGSM 850/900; Class 1 (+30dBm ± 2dB) for GSM 1800/1900 |
| Input Voltage: |
~100-270 VAC, 50/60 Hz |
| Max load Power: |
1000 W |
| Operating Temperature: |
-40…+70°C |
| Setup: |
Remote via Qulon Software |
| Dimensions, mm: |
84(D) x 44(H) x 84(W) |
| Mounting: |
Luminaire case, pole, e.t.c |
Accessories
| 5-pin connector socket (NEMA) |
QUL-ACC-NEM-135 |
| 7-pin connector socket (NEMA) |
QUL-ACC-NEM-137 |
| Motion sensor |
QUL-ACC-RFM-112 |
| Kit for detachable installation |
QUL-ACC-RFM-141 |
| Kit for mounting on the pillar |
QUL-ACC-RFM-142 |
| Kit for mounting on the wall |
QUL-ACC-RFM-143 |
| Kit for mounting on the lighting cabinet |
QUL-ACC-RFM-144 |
LiteWide Node
LiteWide Node – GSM Lighting controller
LiteWide Node is wireless GSM control unit installed into the housing of each luminaire (or mounted to NEMA socket). Every lamp equipped with LiteWide Node is controlled individually via GSM through Sundrax’s innovative LiteWide technology. Unlike wireless radio control nodes, LiteWide Nodes communicate directly with QULON Server without any intermediate gateways.
Wireless Lighting Control
LiteWide Node provides dimming functionality via different interfaces (DALI, PWM/1-10 V) as well as individual load control (on/off).
Key Features
- Versions with open wires and NEMA plug
- Waterproof case IP65
- Individual lighting control without additional wires
- Embedded luminance sensor
- Embedded GSM antenna
- Embedded GPS/GLONASS receiver
- Embedded triac for load switching on/off
- Scheduled on/off and dimming
- Automatic node positioning on the map
- Motion sensor input
Specifications
Connectors: Leads, NEMA
Sensors: Motion sensor input, Embedded luminance sensor
Control output interface: 1-10V/PWM, DALI
Communication with controller: GSM 850/900/1800/1900
Navigation: GPS/GLONASS
Transmit power ranges: Class 4 (+33dBm ± 2dB) for EGSM 850/900; Class 1 (+30dBm ± 2dB) for GSM 1800/1900
Input Voltage: ~100-270 VAC, 50/60 Hz
Max load Power: 1000 W
Operating Temperature: -40…+70°C
Setup: Remote via Qulon Software
Dimensions, mm: 84(D) x 44(H) x 84(W)
Mounting: Luminaire case, pole, e.t.c
Accessories
5-pin connector socket (NEMA) QUL-ACC-NEM-135
7-pin connector socket (NEMA) QUL-ACC-NEM-137
Motion sensor QUL-ACC-RFM-112
Kit for detachable installation QUL-ACC-RFM-141
Kit for mounting on the pillar QUL-ACC-RFM-142
Kit for mounting on the wall QUL-ACC-RFM-143
Kit for mounting on the the lighting cabinet QUL-ACC-RFM-144
