PixelGate DIN — Cascadable direct ArtNet/sACN to SPI LED pixel strip driver
Description
ArtNet/sACN to SPI controllers for pixel mapped indoor and outdoor LED strip installations. Two Ethernet ports and integrated switch provide cascadability. Directly convert up to 16 DMX universes into SPI to control 2,730 RGB pixels supporting up to 8 separate LED outputs.
By default support WS28xx LEDs with additional LED types available by remote firmware update. Power supplied to LEDs separately, from 5V to 48V. Outputs are configurable through web-based management page.
PixelGate DIN is a DIN rail mounted (4 modules) IP20 unit.
Advantages
- Cascadable through integrated switch and 2 Ethernet ports
- Support ArtNet and sACN
- LEDs with power supply up to 48V
- Work with two-wire and three-wire strips
- Support various LED types
- Natural heat convection, no fans or coolers, no vent slots – full protection from dust and smoke increases product lifetime
- Power source 5/12/24/48 VDC
Application
- Control drivers of LED pixel strips by converting ArtNet/sACN to SPI
- Drivers for LED light curtains with individual pixel control
- Drivers for LED strip installations with individual pixel control
- Drivers for mapped LED strip screens
- Mapping of moving images on free-form objects
New firmware, January 2019:
- new flat web interface for device setup
- one-wire interface LED strips support: WS2811, WS2812B, WS2818, TM1809, UCS1903, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B, UCS2903, UCS2903S, UCS2909, UCS2912, INK1002, INK1003, LX1003
- two-wire interface LED strips support: WS2801, WS2803, DM413, APA102, LPD8803, LPD8806
Software Compatibility
In fact, PixelGates work fine with any lighting software that supports ArtNet/sACN, some of time-tested solutions are:
- Elios
- Madrix
- LightJams
- LightingPad
- Jinx!
- Luminair
Specifications
Housing: Solid metal case (IP65)
Operating Temperature: -40…+70°C
Dimensions, mm: 103(D) x 19(H) x 79(W)
Weight: 0.35 kg
Mounting: DIN rail (4 modules)
Power supply: 5/12/24/48 VDC
Indicators: LED for Ethernet activity
Control interface: ArtNet, ACN
Channels: 8 SPI
Supported LED strips: WS2812B, WS2811, TM1809, UCS1903, WS2801, APA102, LPD8806, WS2818, WS2812S, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B, UCS2903, UCS2903S, UCS2909, UCS2912, INK1002, INK1003, LX1003, SM16703, WS2813, WS2813A, WS2813B, WS2813C, WS2813D, TM1803, TM1804, TM1812, TM1814, TM1829, WS2803, DM413, LPD8803, LPD6803, LPD6813, LPD1101, UCS5903, UCS6909, UCS6912, UCS7009, D705, D707, D708
Setup: Web interface
LED outputs: 8, TTL 3/5V
Ethernet ports: 2, 10/100 Base-TX
Ethernet connectors: 2 LSA-PLUS® connectors
Product Line
Pixel strip driver, 8 LED ports, 2 Ethernet ports (2730 RGB pixels)
Product code: PXD-1-2E8SPI
EAN:
Accessories
DIN rail mounting kit ACC-MK-DIN03
Ethernet cable, RJ-45, 3 metres ACC-CCE-X/RJ3
PixelGate DIN
PixelGate DIN — Cascadable direct ArtNet/sACN to SPI LED pixel strip driver
Description
ArtNet/sACN to SPI controllers for pixel mapped indoor and outdoor LED strip installations. Two Ethernet ports and integrated switch provide cascadability. Directly convert up to 16 DMX universes into SPI to control 2,730 RGB pixels supporting up to 8 separate LED outputs.
By default support WS28xx LEDs with additional LED types available by remote firmware update. Power supplied to LEDs separately, from 5V to 48V. Outputs are configurable through web-based management page.
PixelGate DIN is a DIN rail mounted (4 modules) IP20 unit.
Advantages
- Cascadable through integrated switch and 2 Ethernet ports
- Support ArtNet and sACN
- LEDs with power supply up to 48V
- Work with two-wire and three-wire strips
- Support various LED types
- Natural heat convection, no fans or coolers, no vent slots – full protection from dust and smoke increases product lifetime
- Power source 5/12/24/48 VDC
Application
- Control drivers of LED pixel strips by converting ArtNet/sACN to SPI
- Drivers for LED light curtains with individual pixel control
- Drivers for LED strip installations with individual pixel control
- Drivers for mapped LED strip screens
- Mapping of moving images on free-form objects
New firmware, January 2019:
- new flat web interface for device setup
- one-wire interface LED strips support: WS2811, WS2812B, WS2818, TM1809, UCS1903, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B, UCS2903, UCS2903S, UCS2909, UCS2912, INK1002, INK1003, LX1003
- two-wire interface LED strips support: WS2801, WS2803, DM413, APA102, LPD8803, LPD8806
Software Compatibility
In fact, PixelGates work fine with any lighting software that supports ArtNet/sACN, some of time-tested solutions are:
- Elios
- Madrix
- LightJams
- LightingPad
- Jinx!
- Luminair
Specifications
Housing: Solid metal case (IP65)
Operating Temperature: -40…+70°C
Dimensions, mm: 103(D) x 19(H) x 79(W)
Weight: 0.35 kg
Mounting: DIN rail (4 modules)
Power supply: 5/12/24/48 VDC
Indicators: LED for Ethernet activity
Control interface: ArtNet, ACN
Channels: 8 SPI
Supported LED strips: WS2812B, WS2811, TM1809, UCS1903, WS2801, APA102, LPD8806, WS2818, WS2812S, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B, UCS2903, UCS2903S, UCS2909, UCS2912, INK1002, INK1003, LX1003, SM16703, WS2813, WS2813A, WS2813B, WS2813C, WS2813D, TM1803, TM1804, TM1812, TM1814, TM1829, WS2803, DM413, LPD8803, LPD6803, LPD6813, LPD1101, UCS5903, UCS6909, UCS6912, UCS7009, D705, D707, D708
Setup: Web interface
LED outputs: 8, TTL 3/5V
Ethernet ports: 2, 10/100 Base-TX
Ethernet connectors: 2 LSA-PLUS® connectors
Product Line
Pixel strip driver, 8 LED ports, 2 Ethernet ports (2730 RGB pixels)
Product code: PXD-1-2E8SPI
EAN:
Accessories
DIN rail mounting kit ACC-MK-DIN03
Ethernet cable, RJ-45, 3 metres ACC-CCE-X/RJ3
