Splitter Pro

Rack-Mountable Signal Management and Amplification Unit

Dual-zone rack mountable professional, optically isolated DMX512 splitter / booster with RDM functionality

Data Sheet

Splitter Pro is a single or double channel DMX512 interface splitter. It is designed to control DMX512 based lighting equipment.

Splitter Pro supports DMX512, RDM (ANSI E1.20).

Splitter distributes the signal from 1 or 3 inputs to 5, 8 or 10 outputs, using XLR connectors (3 or 5 pins) or EtherCON. The Splitter Pro's smart indication detects the presence of a DMX512 or RDM data in the channel.

The unit is powered via 110/220 V mains.

Splitter Pro is designed for installation in a 19" rack. The height of the converter is 1U.

DMX Bi-Direct
DMX Bi-Direct
Bidirectional DMX network, faultless conversion in both ways
Supports RDM
Supports RDM
Full RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStart
Ready device in less than 3 seconds after power supply
Galvanic Isolated Ports
Galvanic Isolated Ports
Full isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat Convection
No fans, no coolers, no vent slots - full protection from dust

Advantages

No buttons
Ethercon or XLR (customer request)
Time-tested in severe weather conditions
100% input data reservation
Single or double input modes
Input back up function
DMX Thru port

Industry protocols

All relevant industry-standard protocols such as DMX512 and RDM are supported

Pro Series is special portfolio of 19'' rackmounted (or clampmounted) professional DMX transceivers, DMX to ArtNet/sACN converters with fiber optic ports available pro switches, hybrids and splitters in smalldepth lightweight metal housing.

View all

Spain

Línea de productos de nodos Ethernet y Splitters montados en rack

Watch on YouTube

Spain

Una breve introducción a los splitters DMX de Sundrax

Watch on YouTube

DMX Splitters: Overview

Multifunctional splitters for larger DMX networks boosting the signal to create a network of 5 or 10 additional DMX lines from DMX input. All input and output channels have full galvanic isolation. Remote Device Management (RDM) compatible. The devices are suitable for indoor and outdoor use. Splitters are powered by 100-250V industrial AC mains, power consumption is less than 5 watts.

Watch on YouTube

Mechanical: Housing: Short 1U Rack
Material: metal
Dimensions, mm: 482,6 (L) x 43,6 (H) x 125,6 (W)
Weight: 1.2 kg
Mounting: in a rack, 1 module
Power & Electrical: Power supply: ~ 100-250 V, 50/60 Hz
Max power consumption: 5W
Fuse: 0.5 A
Environment: Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 20
Certificates: CE compliant, RoHS
Warranty: 36 months
Control / Data Connections: Supported protocols: DMX512, RDM, BeDMX
Refresh rate DMX data: 44 Hz

Inputs / Outputs: DMX Inputs: 1
DMX Outputs: 5 or 10
DMX connectors: 1 XLR (3/5 / etherCON) M, 10 XLR (3/5 / etherCON) F
BeDMX ports: 1
PowerCON ports: 1 (TRUE1)
Configuration / Indication: Indicators: LED, for DMX inputs
Package Contents: Splitter Pro