QULON C, QULON C1, QULON C2 — Gateways for Remote Lighting Control
QULON C1 Data Sheet
Description
Both classic QULON C and next-generation C2 are gateways for QULON Street Lighting Control and Management System. Gateways are installed into lighting cabinet to provide remote lighting control for all components of lighting network: magnetic starters, power meter, individual lamp controllers, sensors, add-on Qulon hardware. Data from the connected devices and meters are collected by gateways via RS-485 or CAN interfaces and then sent to Qulon server via GSM/GPRS/3G mobile network or Ethernet 10/100 Base TX. Programming, scheduling and troubleshooting are done remotely from QULON software. C2 is same reliable core gateway for lighting control system as QULON C controller with some essential improvements like 3G and Ethernet support for faster communication and GPS/GLONASS for synchronization and better positioning.
Key Features
- Non-volatile memory
- Built-in backup power supply
- Built-in AC power supply
- Astronomical clock onboard
- Scenario scheduling and live remote control
- Independent control of each phase
- Powerline individual control with QULON Simpline
- Wireless individual control in 868/915 MHz with QULON LiTouch
- Withstand voltage up to 305 V
- GPS/GLONASS (C2 only) and astronomical clock onboard
- Straightforward design for simple installation
- Identification and immediate alert of electrical faults
- Access to electric meter and other sensors via RS-485
- Full management through built-in GSM/GPRS modem (QULON C)
- Full management through built-in GSM/GPRS/3G modem or Ethernet (C2)
Specifications
Relay outputs: 2 (C1) or 4 (C, C2)
Voltage control inputs: 3 (C1), 6 (C) or 7 (C2)
Max voltage and current on inputs: 250V, 5A
Max voltage and current on outputs: 250V, 5A
Sensor inputs: 2
Radio channel: GSM 850/900/1800/1900
Transmit Power Range(s): Class 4 (+33dBm ±2dB) for EGSM 850/900
Class 1 (+30dBm ±2dB) for GSM 1800/1900
Navigation: GPS/GLONASS (Qulon C2 only)
Data exchange with the control office: RS-485, CAN, GSM/GPRS/EDGE (Qulon C and C1) or
GSM/GPRS/3G (Qulon C2)
Settings: Locally via Ethernet; Remote via GSM/GPRS/EDGE (Qulon C and C1) or GSM/GPRS/3G (Qulon C2)
Connectors: Terminal blocks 2EDGVC, 15EDGVC
Power supply: ~100-270 VAC, 50/60 Hz or 12-30V
Mains Fuse: 0.5 A
Working temperature range: -40…+70°C
Industrial protection: IP20
Dimensions: 210 х 105 x 75mm
Mount: DIN rail in the power cabinet or individual waterproof box
Product Line
Controller Qulon C1: 2 relay outputs, 3 voltage control inputs, 2G GSM, RS-485 (MODBUS), 2 sensor inputs, AC 100-250V
Product code: QUL-C-2G0203X
EAN: 5060452240176
Controller Qulon C: 4 relay outputs, 7 voltage control points, RS-485 (MODBUS),CAN, 2G GSM/GPRS, 2 sensor inputs, AC 100-250V
Product code: QUL-C-2G0407X
EAN: 5060452240107
Controller Qulon C: 4 relay outputs, 7 voltage control points, RS-485 (MODBUS),CAN, 2G GSM/GPRS, 2 sensor inputs, DC 9-36V
Product code: QUL-C-2G0407X-DC
EAN: 5060452240114
Controller Qulon C2: 4 relay outputs, 7 voltage control inputs, 3G GSM, Ethernet, 1GB memory, 2 RS-485 (MODBUS), CAN, 2 sensor inputs, 2 SIM, GPS/GLONASS, AC 100-250V
Product code: QUL-C-3G0407E
EAN: 5060452240121
Controller Qulon C2: 4 relay outputs, 7 voltage control inputs, 3G GSM, Ethernet, 1GB memory, 2 RS-485 (MODBUS), CAN, 2 sensor inputs, 2 SIM, GPS/GLONASS, AC 100-250V, US/CA VERSION
Product code: QUL-C-3GU0407E
EAN: 5060452240138
Controller Qulon C2: 4 relay outputs, 7 voltage control inputs, 3G GSM, Ethernet, 1GB memory, 2 RS-485 (MODBUS), CAN, 2 sensor inputs, 2 SIM, GPS/GLONASS, DC 12-30V
Product code: QUL-C-3G0407E-DC
EAN: 5060452240145
Accessories
DIN rail mounting kit QUL-C-AC-DIN
Enhanced signal quality GSM antenna QUL-ACC-GSM-401
Vandal-proof GSM antenna QUL-ACC-GSM-402
Antenna Cable 5m QUL-ACC-ANT-0500
Antenna Cable 10m QUL-ACC-ANT-1000
Qulon PLX QUL-PLX-2
RS-232 adapter QUL-C-AC-485-232
Gateway for Remote Lighting Control
QULON C, QULON C1, QULON C2 — Gateways for Remote Lighting Control
Description
Both classic QULON C and next-generation C2 are gateways for QULON Street Lighting Control and Management System. Gateways are installed into lighting cabinet to provide remote lighting control for all components of lighting network: magnetic starters, power meter, individual lamp controllers, sensors, add-on Qulon hardware. Data from the connected devices and meters are collected by gateways via RS-485 or CAN interfaces and then sent to Qulon server via GSM/GPRS/3G mobile network or Ethernet 10/100 Base TX. Programming, scheduling and troubleshooting are done remotely from QULON software. C2 is same reliable core gateway for lighting control system as QULON C controller with some essential improvements like 3G and Ethernet support for faster communication and GPS/GLONASS for synchronization and better positioning.
Key Features
- Non-volatile memory
- Built-in backup power supply
- Built-in AC power supply
- Astronomical clock onboard
- Scenario scheduling and live remote control
- Independent control of each phase
- Powerline individual control with QULON Simpline
- Wireless individual control in 868/915 MHz with QULON LiTouch
- Withstand voltage up to 305 V
- GPS/GLONASS (C2 only) and astronomical clock onboard
- Straightforward design for simple installation
- Identification and immediate alert of electrical faults
- Access to electric meter and other sensors via RS-485
- Full management through built-in GSM/GPRS modem (QULON C)
- Full management through built-in GSM/GPRS/3G modem or Ethernet (C2)
Specifications
Relay outputs: 2 (C1) or 4 (C, C2)
Voltage control inputs: 3 (C1), 6 (C) or 7 (C2)
Max voltage and current on inputs: 250V, 5A
Max voltage and current on outputs: 250V, 5A
Sensor inputs: 2
Radio channel: GSM 850/900/1800/1900
Transmit Power Range(s): Class 4 (+33dBm ±2dB) for EGSM 850/900
Class 1 (+30dBm ±2dB) for GSM 1800/1900
Navigation: GPS/GLONASS (Qulon C2 only)
Data exchange with the control office: RS-485, CAN, GSM/GPRS/EDGE (Qulon C and C1) or
GSM/GPRS/3G (Qulon C2)
Settings: Locally via Ethernet; Remote via GSM/GPRS/EDGE (Qulon C and C1) or GSM/GPRS/3G (Qulon C2)
Connectors: Terminal blocks 2EDGVC, 15EDGVC
Power supply: ~100-270 VAC, 50/60 Hz or 12-30V
Mains Fuse: 0.5 A
Working temperature range: -40…+70°C
Industrial protection: IP20
Dimensions: 210 х 105 x 75mm
Mount: DIN rail in the power cabinet or individual waterproof box
Product Line
Controller Qulon C1: 2 relay outputs, 3 voltage control inputs, 2G GSM, RS-485 (MODBUS), 2 sensor inputs, AC 100-250V
Product code: QUL-C-2G0203X
EAN: 5060452240176
Controller Qulon C: 4 relay outputs, 7 voltage control points, RS-485 (MODBUS),CAN, 2G GSM/GPRS, 2 sensor inputs, AC 100-250V
Product code: QUL-C-2G0407X
EAN: 5060452240107
Controller Qulon C: 4 relay outputs, 7 voltage control points, RS-485 (MODBUS),CAN, 2G GSM/GPRS, 2 sensor inputs, DC 9-36V
Product code: QUL-C-2G0407X-DC
EAN: 5060452240114
Controller Qulon C2: 4 relay outputs, 7 voltage control inputs, 3G GSM, Ethernet, 1GB memory, 2 RS-485 (MODBUS), CAN, 2 sensor inputs, 2 SIM, GPS/GLONASS, AC 100-250V
Product code: QUL-C-3G0407E
EAN: 5060452240121
Controller Qulon C2: 4 relay outputs, 7 voltage control inputs, 3G GSM, Ethernet, 1GB memory, 2 RS-485 (MODBUS), CAN, 2 sensor inputs, 2 SIM, GPS/GLONASS, AC 100-250V, US/CA VERSION
Product code: QUL-C-3GU0407E
EAN: 5060452240138
Controller Qulon C2: 4 relay outputs, 7 voltage control inputs, 3G GSM, Ethernet, 1GB memory, 2 RS-485 (MODBUS), CAN, 2 sensor inputs, 2 SIM, GPS/GLONASS, DC 12-30V
Product code: QUL-C-3G0407E-DC
EAN: 5060452240145
Accessories
DIN rail mounting kit QUL-C-AC-DIN
Enhanced signal quality GSM antenna QUL-ACC-GSM-401
Vandal-proof GSM antenna QUL-ACC-GSM-402
Antenna Cable 5m QUL-ACC-ANT-0500
Antenna Cable 10m QUL-ACC-ANT-1000
Qulon PLX QUL-PLX-2
RS-232 adapter QUL-C-AC-485-232
